OEM Ceramic Part

We can make ceramic parts such as shaft, sleeve, rod, pin, plate, ring, plate, substrate etc. We can also make parts based on drawing, sample, or performance requirement.


Your Inquiries will be replied within 24 hours

Email: [email protected]

Tel.: 0086-21-69959291

OEM Ceramic Part

Type: OEM Ceramic Parts

MOQ: according to customer requirement

Material: Zirconia, Alumina

QC: ISO/SGS


Your Inquiries will be replied within 24 hours

Email: [email protected]

Tel.: 0086-21-69959291

1. Wear resistant
2. Acid proof
3. High temperature, fire proof
4. Long working life

Technical Parameter
Item Unit 99 Al2O3 ZrO2
Physical Characteristics Bulk density g/cm3 3.9 6.05
Water absorption % 0 0
Mechanical Characteristics Flexural strength Mpa 360 1000
Hardness Vickers Gpa 15.6 89
Elastic modulus Gpa 370 200
Poisson’s ratio 0.23 0.31
Thermal Characteristics Linear expansion coefficient (20-5000°C) 10-6/0°C 8 10
Thermal conductivity w/(m·k) 32 2.5
Specific Heat ×10-3J/(kg·K) 0.9 0.5
Electrical Characteristics Dielectric constant (1MHZ 9.9 N.A.
Dielectric loss angle ×10-4 1 N.A.
Dielectric strength ×10-6V/m 15 N.A.

Application Area: Ceramic sand blasting bead is also known as zirconia shot peening, ceramic shot peening, ceramic sand, electric fused silica zirconia grinding beads. It can be applied in the surface handing of 3C, hardwares and machineries etc.

Application Area: ...

Related Product